Information about cable, connector or adapter : Apple iPod dock Connector Pinout  

BUY CHEAP apple ipod dock

 Apple iPod dock Connector Pinout
 Originally developed by :
 Copyright :
 Source :
 Category :   All cables and connectors > Connectors > Computer >
 Added to database : 2012-04-28 05:31:06



 Description : 30 pin connector used on the dock station for iPod, iPad and iPhone. Available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G, 5G and Nano).
Click/Tap on image to ZOOM

 
Apple iPod dock Connector Pinout

 ipad connector

 Pinout : 0


PinNameDirectionColorDescription
1GNDGround (-), internaly connected with Pin 2 on iPod motherboard
2GNDAudio and Video ground (-), internaly connected with Pin 2 on iPod motherboard
3RightLine Out - R (+) (Audio output, right channel)
4LeftLine Out - L(+) (Audio output, left channel)
5Right In Line In - R (+)
6Left In Line In - L (+)
7n/cn/c
8Video Out Composite video output (only when the slideshow mode is active on iPod Photo)
9S-Video Chrominance output for iPod Color, Photo only
10S-Video Luminance outputfor iPod Color, Photo only
11GNDSerial GND
12txipod sending line, Serial TxD
13rxipod receiving line, Serial RxD
14ncnc
15GNDGround (-), internaly connected with pin 16 on iPod motherboard
16GNDUSB GND (-), internaly connected with pin 15 on iPod motherboard
17ncnc
183.3V 3.3V Power (+) Stepped up to provide +5 VDC to USB on iPod Camera Connector. If iPod is put to sleep while Camera Connector is present, +5 VDC at this pin slowly drains back to 0 VDC.
19+12V Firewire Power 12 VDC (+)
20+12V Power for connector (3.3 V 500 mA)
21Accessory Indicator/Serial enaDifferent resistances indicate accessory type: 1KOhm - iPod docking station, beeps when connected .. 10KOhm - Takes some iPods into photo import mode....500KOhm - related to serial communication / used to enable serial
22TPA (-) FireWire Data TPA (-)
235 VDC (+) USB Power 5 VDC (+)
24TPA (+) FireWire Data TPA (+)
25Data (-) USB Data (-)
26TPB (-) FireWire Data TPB (-)
27Data (+) USB Data (+) Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when 'USB Power 5 VDC' (pin 23) is fed, 25 must be connected to 5V through a 10KOhm resistor, and 27 must be connected to the Ground (for example: pin
28TPB (+)FireWire Data TPB (+)
29GNDFireWire Ground (-)
30GNDFireWire Ground (-)

 Note :
COMMENTS:



Search for Disassembly manuals
PinoutMaster team 2005 - 2024 Service manuals - Car Audio Unlock- Elemetnt Datasheets-