PINOUT.NET




Information about cable, connector or adapter : Apple iPod dock Connector Pinout  


 Apple iPod dock Connector Pinout
 Originally developed by :
 Copyright :
 Source :
 Category :   All cables and connectors > Connectors > Computer >
 Added to database : 2012-04-28 05:31:06



 Description : 30 pin connector used on the dock station for iPod, iPad and iPhone. Available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G, 5G and Nano).

 Apple iPod dock Connector Pinout
 ipad connector

 Pinout : 0


PinNameDirectionColorDescription
1GNDGround (-), internaly connected with Pin 2 on iPod motherboard
2GNDAudio and Video ground (-), internaly connected with Pin 2 on iPod motherboard
3RightLine Out - R (+) (Audio output, right channel)
4LeftLine Out - L(+) (Audio output, left channel)
5Right In Line In - R (+)
6Left In Line In - L (+)
7n/cn/c
8Video Out Composite video output (only when the slideshow mode is active on iPod Photo)
9S-Video Chrominance output for iPod Color, Photo only
10S-Video Luminance outputfor iPod Color, Photo only
11GNDSerial GND
12txipod sending line, Serial TxD
13rxipod receiving line, Serial RxD
14ncnc
15GNDGround (-), internaly connected with pin 16 on iPod motherboard
16GNDUSB GND (-), internaly connected with pin 15 on iPod motherboard
17ncnc
183.3V 3.3V Power (+) Stepped up to provide +5 VDC to USB on iPod Camera Connector. If iPod is put to sleep while Camera Connector is present, +5 VDC at this pin slowly drains back to 0 VDC.
19+12V Firewire Power 12 VDC (+)
20+12V Power for connector (3.3 V 500 mA)
21Accessory Indicator/Serial enaDifferent resistances indicate accessory type: 1KOhm - iPod docking station, beeps when connected .. 10KOhm - Takes some iPods into photo import mode....500KOhm - related to serial communication / used to enable serial
22TPA (-) FireWire Data TPA (-)
235 VDC (+) USB Power 5 VDC (+)
24TPA (+) FireWire Data TPA (+)
25Data (-) USB Data (-)
26TPB (-) FireWire Data TPB (-)
27Data (+) USB Data (+) Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when 'USB Power 5 VDC' (pin 23) is fed, 25 must be connected to 5V through a 10KOhm resistor, and 27 must be connected to the Ground (for example: pin
28TPB (+)FireWire Data TPB (+)
29GNDFireWire Ground (-)
30GNDFireWire Ground (-)

 Note :
COMMENTS: