Find your manual in our Disassemble database ...

     HOME      | Mobile phones | Laptops nad netbooks | Desktop PC | Monitors and screens |      OTHER

Can't find what you need? Request a disassembly manuals and we will try to locate it and add it to our database.

 » - Disassemble Database »  Replacing Lamp the Epson PowerLite S7 79 W7 S7 W7 WEX31 EX51 EX71

If you like this manual recomend it to your friends...

  1. Turn off the projector and unplug the power cord.
  2. Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use.
  3. Loosen the lamp cover screw (you cannot remove it). Then slide the lamp cover off.
  4. Loosen the two screws holding the lamp in place (you can’t remove them).


  5. Hold the lamp as shown and pull it straight out.


  6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
    facing the right way.) Then tighten its screws.


  7. Replace the lamp cover, then tighten its screw.


  8. Reset the lamp timer.

If you like this manual recomend it to your friends...