Share this pinout

Motorola V3 mini-USB Charger pinout : Pinout cable and connector diagrams-usb, serial rs232,rj45 ethernet, vga, parallel, atx, dvi...
 
      
   Home · Search · Browse · Upload · Request Pinout · New Connectors · Forum · Pinout Images · Service manuals · Disassembly Manuals



Information about cable, connector or adapter : Motorola V3 mini-USB Charger pinout  
 

 Motorola V3 mini-USB Charger pinout
 Originally developed by :
 Copyright :
 Source :
 Category :   All cables and connectors > Connectors > Cellular Phones >
 Added to database : 2006-12-15 09:05:09



 Description : Motorola V3 mini-USB Charger pinout

 Motorola V3 mini-USB Charger pinout
 

 Pinout : 0


PinNameDirectionColorDescription
1+5 VDCPC USB Pin 1 (+5 VDC). Shorted to pin X via R=200KOhm in charge cable.
2 USB Datanot connected charge cable.
3 USB Datanot connected charge cable.
xresistorShorted to pin 1 via R=200KOhm. Shorted to pin 4 via R=200KOhm in charge cable.
4GndPC USB pin 4 (GND). Shorted to pin X via R=200KOhm in charge cable.

 Note : V3 will not charge by simply supplying 5V through USB (it's possible to use common USB cable for charging if you are using Motorola special PC driver software). Motorola uses the pin between Pin #3 and #4 (Pin X) to sense what device is attached to the mini-USB port. Shorting Pin #3 to #2 and #X causes the phone to go into handsfree/carkit mode and the LCD backlight will ignore timeout settings and stay on. Shorting pin X to pin 1 via R=200KOhm and to pin 4 via R=200KOhm causes the phone to go into charge mode.
COMMENTS: