| Pinout for:DisplayPort version 1.2 Display Port |
Description : Display Port : Pins 13 and 14 may either be directly connected to ground or connected to ground through a pulldown device. This is the pinout for source-side connector, the sink-side connector pinout will have lanes 0�3 reversed in order; i.e., lane 3 will be on pin 1(n) and 3(p) while lane 0 will be on pin 10(n) and 12(p).
DisplayPort version 1.2
Pinout :
| Pin | Name | Description |
| 1 | ML_Lane 0 (p) | Lane 0 (positive) |
| 2 | GND | Ground |
| 3 | ML_Lane 0 (n) | Lane 0 (negative) |
| 4 | ML_Lane 1 (p) | Lane 1 (positive) |
| 5 | GND | Ground |
| 6 | ML_Lane 1 (n) | Lane 1 (negative) |
| 7 | ML_Lane 2 (p) | Lane 2 (positive) |
| 8 | GND | Ground |
| 9 | ML_Lane 2 (n) | Lane 2 (negative) |
| 10 | ML_Lane 3 (p) | Lane 3 (positive) |
| 11 | GND | Ground |
| 12 | ML_Lane 3 (n) | Lane 3 (negative) |
| 13 | CONFIG1 | to Ground |
| 14 | CONFIG2 | to Ground |
| 15 | AUX CH (p) | Auxiliary Channel (positive) |
| 16 | GND | Ground |
| 17 | AUX CH (n) | Auxiliary Channel (negative) |
| 18 | Hot Plug | Hot Plug Detect |
| 19 | Return | Return for Power |
| 20 | DP_PWR | Power for connector (3.3 V 500 mA) |
Note : Display Port