PINOUT.NET




Information about cable, connector or adapter : Internal Diskdrive  
 

 Internal Diskdrive
 Originally developed by :
 Copyright :
 Source :
 Category :   All cables and connectors > Connectors > Computer > Diskdrives >
 Added to database : 2005-12-12 12:06:46



 Description : Internal Diskdrive

 Internal Diskdrive
 34 PIN IDC MALE at the computer & diskdrives

 Pinout : 0


PinNameDirectionColorDescription
1GND-Ground
2/REDWCOUTDensity Select
3GND-Ground
4n/cReserved
5GND-Ground
6n/cReserved
7GND-Ground
8/INDEXINIndex
9GND-Ground
10/MOTEAOUTMotor Enable A
11GND-Ground
12/DRVSBOUTDrive Sel B
13GND-Ground
14/DRVSAOUTDrive Sel A
15GND-Ground
16/MOTEBOUTMotor Enable B
17RES-Reserved
18/DIROUTDirection
19GND-Ground
20/STEPOUTStep
21GND-Ground
22/WDATEOUTWrite Data
23GND-Ground
24/WGATEOUTFloppy Write Enable
25GND-Ground
26/TRK00INTrack 0
27RES-Reserved
28/WPTINWrite Protect
29GND-Ground
30/RDATAINRead Data
31GND-Ground
32/SIDE1OUTHead Select
33GND-Ground
34/DSKCHGOUTDisk Change

 Note : The connector on a floppy drive consists of 34 conductors. Both control and data use this same cable. Most cables have a twist that interchanges pins 10 through 16 at the end of the cable (on 1). Most floppy connectors have a "key" between pins & 6, and 3 & 5, to prevent the cable from being reversed. At the other end, the dual row connector that attaches to the controller card will usually have a set of ridges that coincide with cutouts in the controller card's connector. Note that old style floppy-only controllers used a card-edge connector just like that of the drive.
COMMENTS: